Jump to content


Sell the rollas! Get this instead!

negatron
 Share

Recommended Posts
Buddha Grand Master

Buddha

Posted
Posted

That would have to be the best looking kit car I've ever seen! :rolleyes:


CAP Grand Master

CAP

Posted
Posted
It still looks like an MR2...have a look at the picture second from the bottom on the left...unmistakeable...

Still one of the best ones I've seen though, I'd like to see a front on shot and rear shot, because what makes a Ferrari unmistakable is the W I D E look they have. I don't think the MR2 shell would have the width to really pull it off.

But all the same looks cool! :)

negatron Grand Master

negatron

Posted
  • Author
Posted
It still looks like an MR2...have a look at the picture second from the bottom on the left...unmistakeable...

Still one of the best ones I've seen though, I'd like to see a front on shot and rear shot, because what makes a Ferrari unmistakable is the W I D E look they have. I don't think the MR2 shell would have the width to really pull it off.

But all the same looks cool! :)

Well, when/if i see that in the streets i won't think "hey, thats the most done up mr2 i've ever seen." I'll be thinking, "hey, thats the smallest Ferrari I've ever seen."

Then i'd go and kick it in the tyres.

DANZZT231 Grand Master

DANZZT231

Posted
Posted

It still look cool nonetheless. Besides, if you fly by chappel with that, most people would've think that's a Ferrari. Then again, if that car has 3S-GTE, it would be even better, but won't be as sizzling hot as the Ferrari engine.

Danthuyer Grand Master

Danthuyer

Posted
Posted

WOW!!!

Looks hot.

Has anyone else seen the Acura NSX that gets the full F50 replica bodykit?

lemme find the link........... HERE IT IS WARNING - over 100 pictures....dialup killer!

"RuNx" Grand Master

"RuNx"

Posted
Posted

the gt porche kit looks great on the MRS too!!! it actually looks more like the porche than the MR2 looks like a ferrari......sorry but i cant find a pic anywhere on the net atm!!! :rolleyes:

eddy_torrezz Grand Master

eddy_torrezz

Posted
Posted

thats **** hot.

i know at the end of the day its just and mr2 but look at the whole cost diff.

i wouldnt knock it back i know that.

its definatly a poor mans ferrari.lol :D

i want 1

eddy_torrezz Grand Master

eddy_torrezz

Posted
Posted
WOW!!!

Looks hot.

Has anyone else seen the Acura NSX that gets the full F50 replica bodykit?

lemme find the link........... HERE IT IS WARNING - over 100 pictures....dialup killer!

yeah i still reckon the mr2 looks heaps better

Bobjones Collaborator

Bobjones

Posted
Posted

Anyone got a link of those VW's being kitted out like a Porsche...same thing...show without the go...

The 3S-GTE engine is nice, atleast its cheaper to service than a N/A V12...

SILVABULLIT Grand Master

SILVABULLIT

Posted
Posted
Anyone got a link of those VW's being kitted out like a Porsche...same thing...show without the go...

The 3S-GTE engine is nice, atleast its cheaper to service than a N/A V12...

Bob that's because most don't know how to make a VW go....And I do ;)

So I could get the go to match the looks(without a turbo ;) )

negatron Grand Master

negatron

Posted
  • Author
Posted
Anyone got a link of those VW's being kitted out like a Porsche...same thing...show without the go...

The 3S-GTE engine is nice, atleast its cheaper to service than a N/A V12...

Bob that's because most don't know how to make a VW go....And I do ;)

So I could get the go to match the looks(without a turbo ;) )

Hey Silva, what engine would you throw into a Porsched up bettle? I remember someone did a beetle with an old 911 engine in there (but he didn't bother with the kit) kinda cheating as its pretty much an engine, running gear and sitting on top of that a pair of racing seats and a beetle shell. But scary fast!

negatron Grand Master

negatron

Posted
  • Author
Posted
Wow very very nice, just hope that the engine performance matches the looks.

It says the engine is 275 BHP, thats a decent amount of power!

http://members.optusnet.com.au/borboyous/index.htm

The body kit itself costs $9300! And that's just unpainted panels!

Main Kit $9300

Rear Lights (replicas) $465

Front Lights $120

Hub Extensions (spacers) $630

Badges (original only) $430

100% Replica 355 Wheels $2800

Tyres $1175

TOTAL $14920

15 grand on top of the mr2 price to make it look like that, and you'd still need to add on painting, the interior (another 4ish grand) and the H gear thingy anoher 400ish. Damned this is an expensive exercise.

And wow the ebay one has gone up to 21k and still reserve not met!

Buddha Grand Master

Buddha

Posted
Posted

Just had another look at that ad ... it says it has a 2,000 litre engine! :blink:

If that's the case, you wouldn't be looking for much extra power! B)

Can anyone say "cramped engine bay"? :lol:

BigBum Grand Master

BigBum

Posted
Posted

That thing is nutz yo! There's a Mitsubishi GTO lurking around my area with a Ferrari bodykit on it as well. Frickin awesomeeeee dog~ :D

BigBum Grand Master

BigBum

Posted
Posted
WOW!!!

Looks hot.

Has anyone else seen the Acura NSX that gets the full F50 replica bodykit?

lemme find the link........... HERE IT IS WARNING - over 100 pictures....dialup killer!

It looked better before in red than it did after in black!!! :P :P :P

gOODbOYz Grand Master

gOODbOYz

Posted
Posted

damn that MR2 looks shexc with that kit.. ill drive that even if ppl know its fake and laugh at me.. but im sure the chicks will b digging the hell out of it :lol::rolleyes: :o

SILVABULLIT Grand Master

SILVABULLIT

Posted
Posted
Anyone got a link of those VW's being kitted out like a Porsche...same thing...show without the go...

The 3S-GTE engine is nice, atleast its cheaper to service than a N/A V12...

Bob that's because most don't know how to make a VW go....And I do ;)

So I could get the go to match the looks(without a turbo ;) )

Hey Silva, what engine would you throw into a Porsched up bettle? I remember someone did a beetle with an old 911 engine in there (but he didn't bother with the kit) kinda cheating as its pretty much an engine, running gear and sitting on top of that a pair of racing seats and a beetle shell. But scary fast!

type 4 2litre from bay window Kombi

Stroker crank

105mm piston/barrell kit

hydraulic cam and lifters

balance bottom end(shot peen rods etc)

lighten flywheel

Autronic ecu

Aftermarket fuel injection set up

big valves

match porting and porting of cylinder heads

CES custom exhaust system

That combo would produce 300hp and 300 foot pounds of torque. (have a mate with similiar spec engine in an offroader and that's what he got on a dyno with a compression ratio of 8.2:1)

This what I'm considering putting in my 76 Kombi.

So look out Stivo's here comes the orange and white block of flats. :P

If you don't believe me ask Northy... he's seen it with the old engine ;)

negatron Grand Master

negatron

Posted
  • Author
Posted

NIce plan silva!

But the most important thing in a kombi is what colored furry dice? and what curtains ur're going to put on? :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    2. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    3. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    4. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    5. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    6. 10

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    7. 10

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    8. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    10. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership