Jump to content


trentmeyer23

Gold Members
  • Posts

    5,797
  • Joined

  • Last visited

  • Days Won

    188

Everything posted by trentmeyer23

  1. By the looks of it, HelenC has given up on this thread since she has had her dash fixed. She has not logged in since April 15.
  2. Contact Harrop Superchargers. I believe the model is HTV-1320
  3. Pretty sure Road and Track in Ipswich QLD do them. They do a fair bit of work for interstate customers from memory. They are on Facebook and have their own website.
  4. Have you considered an overhead console/storage compartment.
  5. I am not sure about the newer models, but the older models had a silence button for the parking sensors.
  6. I don't think so, but you could try a new one. They usually either create a solid, light on or off situation when they go.
  7. Could be a short or a bad earth. From memory, they do both use the same flasher relay. Unless you are handy with a multimeter/electrical circuit testing, I would suggest an auto electrician.
  8. I guess the ADM models have been wired differently than the other markets in that case.
  9. In that case, disregard my previous reply. I was thinking door mirrors. There should be 3 wires, constant 12V, switched 12V and earth. Pull out the sunglasses storage trim and you may have an unused harness in there.
  10. No reason for the attitude mate, just trying to help. I think I may have misread the question, are you talking about door mirrors or the rear vision mirror?
  11. These forums have a search function, please use it. http://au.toyotaownersclub.com/forums/topic/15501-parker-lights/ http://au.toyotaownersclub.com/forums/topic/34244-how-to-change-the-fog-light-bulbs/
  12. http://au.toyotaownersclub.com/forums/topic/50922-kluger-19-alloys-on-an-aurioncamry/
  13. You could try laying in the boot with a torch; and get someone to drench it with a garden hose.
  14. A lot of the older stuff can be found over at Toymods.
  15. The casing is usually different between LHD and RHD mirrors to get the correct angle of adjustment to suit the driving position.
  16. Probably an issue with ECU, which could be related a faulty injector(s). The latter of the part numbers could be the new number for a superceded part.
  17. It may have also distorted the body as well.
  18. Out of those three sets, the Vertini Dynasty.
  19. You could source it from a wreckers and have a mechanic install it if you are not able to do so.
×
×
  • Create New...

Forums


News


Membership