Jump to content

Recommended Posts

Posted

Congrats on the PB Trung :) ...you gobbled up that R34 in the corners very nicely,great vid.

Posted

Hahaha, well done!! Yeah take a break and recoupe some savings ;)

PM me your number man, we can go carwash and photoshoot at uni hahaha

Peter.


  • 1 month later...
Posted

Not much of an update but here are the Kics NEO R26 lug/lock nuts installed. They replace the gay pink ones I had previously.

23s67w7.jpg

11916v5.jpg

rhvbmc.jpg

fnd310.jpg

Getting road tyres tomorrow as the semi's are dead and it gets abit hair raising to drive in the wet. Also witnessed as an indian reversed into my car and attempted to drive off (we shall not go there), minimum damage but managed to get me raging somewhat lol

Thanks for looking

Posted

Very Nice...no exspense spared,don't they cost the same as gold. :P

i was looking at them until i saw the price :blink: so i settled for the cheaper Titan's.

Posted

Very Nice...no exspense spared,don't they cost the same as gold. :P

i was looking at them until i saw the price :blink: so i settled for the cheaper Titan's.

hehe yeh, they cost enough but lucky for me I didn't pay full retail price. Your car looks the goods with the P1 wheels :D

  • 3 weeks later...
Posted

Just a minor update. Not a whole heap happening really, just a few bits here and there. Good to catch up with a few of you guys at the last Toyota meet.

save48.jpg

Cusco master cylinder brace. Bit of a bitch to install, managing to snap a bolt when tightening the one that holds the middle one. Other than that, works pretty well. Car stops abruptly and without much incident, love not having ABS.

5w077m.jpg

Perhaps abit of a '**** factor' but I replaced some of the vacuum hoses with Samco high temp ones' I got when I was at World Time Attack. Also changed the intake pipe to a 4AFE one as mine has cracked, doens't fit the airbox exactly but I'll get 'round to fixing it. Seem to have the rev-hunt issue sorted.

wqqkn.jpg

And of course, a fake/replica/non-genuine Bride VIOS Low Max (flame suit). As a reminder, my SSCUS wasn't real either but that didn't stop me from track racing. The VIOS is a snug fit which will come in handy when I come back to motorsport (August anyone?)

That's about it really

Thanks for looking

Posted

NOICE vids trung! lol pure sex is this car in person its even more sex lol. have u digested the 2 GTTs and teggie yet? :P

Posted

Looks awesome Trung...such a tuff looking little beast. B)

also great to catch up the other day. :)

Posted

Looks awesome Trung...such a tuff looking little beast. B)

also great to catch up the other day. :)

+1 to this - I didn't manage to get a real close up at the last meet but I'm sure there will be another time!

Posted

NOICE vids trung! lol pure sex is this car in person its even more sex lol. have u digested the 2 GTTs and teggie yet? :P

Thanks man, as for the digesting the other cars'; I manage the Skylines fairly easily but a Type-R Integra with a decent driver has me done at Winton. Corolla can't/won't match the pace of race ready car unless you spend a fair bit on it. I can keep up with the S15's and WRX's ok.

Looks awesome Trung...such a tuff looking little beast. B)

also great to catch up the other day. :)

Cheers Lee, I do like your matte black wheels! *I may be a tad bias there haha

Looks awesome Trung...such a tuff looking little beast. B)

also great to catch up the other day. :)

+1 to this - I didn't manage to get a real close up at the last meet but I'm sure there will be another time!

Always a next time Tash ;)

Hi Trung,

I miss you! :P

This guy! Hope you enjoyed your trip O/S, we'll catch up when your not busy (which is seldom lol)

Posted

Thanks man, as for the digesting the other cars'; I manage the Skylines fairly easily but a Type-R Integra with a decent driver has me done at Winton. Corolla can't/won't match the pace of race ready car unless you spend a fair bit on it. I can keep up with the S15's and WRX's ok.

Steve? :P

Posted

Yes, Steve :(

Had an Apex'i RSM fitted and just bought some Whiteline camber bolts, should arrive next week :D

  • 4 weeks later...
Posted

Ok so did a few things since the last time

2uijae1.jpg

I discovered that my original intake pipe had a crack in it, so replaced it with a 4AFE intake pipe but that was just fail. Knowing my brother had a CAI from one of his previous cars, I took that intake pipe and took my other brothers' new HKS mushroom filter to make my new intake. Bought a silicone coupler and a few other bits to complete it.

dfeh07.jpg

Makes a loud induction noise from about 4000rpm to red line. Will get around to making a heat-shield for it and swapping to a better cold air feed.

2iqmxpg.jpg

GAB brace. HKS filter.

2di3sk2.jpg

Also had an Apex'i RSM (Rev/Speed Meter) fitted for free from a Toyota electrical engineer. Pretty awesome functions for a old unit;

Rev/speed. Max rev/speed

0-100 kph / 0-400m sprints

odometer

Currently shows max rev (x10rpm)

353ayx4.jpg

Current interior. Doesn't look like I can see the RSM but I manage ok.

209kbx5.jpg

Ride height isn't that low to be honest.

Thanks for looking.

  • 2 weeks later...
Posted (edited)

Hey, i think i saw your car gunning it at the roundabout on winsor ave where thanh dat restaurant and going through safe way, made my chaw drop!! :o :lol: I must admit, red and black colours matched perfectly stands out in the crowd.

ONEDAY bro i'll b in your car watchin u Gunning it on the track...HERE GOES THE TWINS-TRUNGSTAH FTW!!! :yahoo: :yahoo: :yahoo::clap: :clap: :clap:

BTW u look very familiar, ino seems like a long time ago i met u at this guy name thanh house party @ thomastown and we were playing street fighter lol!! imo mayb not...

cheers,

Trung.

Edited by tru-star
Posted

Thanks man,

I was at the Mt.Dandenong cruise last time, think I met you. I remember a Trung anyway :P

As for track racing; I'm organising a track day in November at Winton. So maybe we can battle it out. Guni's got a few seconds to make up on me (hint hint) lol

Posted

As for track racing; I'm organising a track day in November at Winton. So maybe we can battle it out. Guni's got a few seconds to make up on me (hint hint) lol

Looking forward to it ....

:lol: :lol: :lol:

  • 3 weeks later...
Posted

For those that may or may not have known, my car suffered a blown head gasket and so rather than just replacing the H/G, I've decided to go one better and replace the head with the ported one I sold previously.

2zg58n5.jpg

The head had the ports mildly ported/cleaned up and were chemically cleaned. It's now at the workshop for reassembly (w/ new valve stem seals) and check clearances. Pictured also are some semi adjustable cam gears and big port cams. The cams offer slightly more lift and duration (240degree duration/7.56mm lift vs 232 degree/7.1mm lift) for $50, I'm not complaining. Should be purchasing a 1mm TODA head gasket next week for a bit more compression. Anyway, bring on Winton and 1.47 baby! (when it's done anyway)

cheers

  • 1 month later...
Posted

where are the updates trung? :lol:

also you have the pm about the supposed winton track day in november! :P

too bad guni can't make it this time... and see me drift LOL jk ;)

bumpy for you mate :P :toast:

Posted (edited)

Since that photo, the head was taken to a head specialist to have the head reassembled with the cams and new valve stem seals along with clearances check ect, that cost me $864 for labour and the VRS kit.

Now, the car has been towed to the workshop and will have the following parts fitted:

head

TODA 1.0mm head gasket (slightly raised compression)

JDM reinforced/strengthened head bolts

GReddy Timing Belt

replace all accessory (alternator/power steering/ water pump) belts

replace water pump

replace oil/oil filter

Have another set of wheels coming from Japan and will be wrapped up in brand new Bridgestone RE55S semi slicks for November track day. Have a few more parts here/there needed to be either bought or fitted. Have booked car in for two track days in November.

Pics will come. Thanks.

Edited by dorifto
Posted

What VRS kit did you go woth and what was it's cost mate?

Posted

Hey Mick,

VRS kit was $260 for an ACL one, should have bought yours but that's life for you. They reassured that the ACL kit was good enough for anything from daily to motorsport usage. Guess I'll have to wait and see

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 10

      Android auto

    2. 0

      E160 Corolla fielder suspension

    3. 0

      Remote start

    4. 1

      1999 Camry Driver's door locking hatch issue

    5. 0

      Query about the correct rotors for 2006 ACV40 Camry.

    6. 10

      Android auto

    7. 10

      Android auto

    8. 1

      Turboed Corolla Overbuilt?

    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

    10. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

×
×
  • Create New...

Forums


News


Membership