What did you do to your car today?

[Guest]

im with ingres, if you have any spare mesh, do the bottom grille too.

[cruzer]

well i gave her a wash

then painted the rear calipers got onto the last caliper and ran out of paint :( so this week sometime i am getting some more paint and putting new engine mounts in

[KevO]

cleaned the engine bay, interior windows and juiced it up

[cruzer]

the corolla reving yeh its upside down oh well Edited September 20, 2009 by cruzer

[123R-Prozak]

just got home, havnt been home since fri, i found out it hailed alittle here in penrith, i run to mi car, since its wet i shami it, now after 10pm, just to see if damage, no damage, took it for a spin.

[michaelweare]

im with ingres, if you have any spare mesh, do the bottom grille too.

Yeah Mick and Ingres, probably will. Do have some spare mesh.

Was thinking the easiest way to do this. Would prefer not to remove the bumper.

[evoke]

Washed and Vacuum the Interior, Washed the exterior and added WINGTIPS!

[DJKOR]

Was thinking the easiest way to do this. Would prefer not to remove the bumper.

From underneath. Remove the splash shields and you can access it all from there.

[MarkMish]

Well I test drove our new ride :P. Picks are up In silver members lounge.

[outback]

Washed and Vacuum the Interior, Washed the exterior and added WINGTIPS!

washed yo interior?

[dorifto]

Bought new wheels

[Blind Kid Seeks]

Bought new wheels

HOT WHEELS!!!! but Trung... you have an addiction.... seek help!!!!!

[sikwitit]

redone my exhorst alot quieter now no more problems sucked in cops hahahahahahahaha

sean

[Blind Kid Seeks]

redone my exhorst alot quieter now no more problems sucked in cops hahahahahahahaha

sean

hahah love this mentality...

more like YOU got sucked in, having to pay for 2 exhaust systems to get it right. *shakes head*

[Evo7]

redone my exhorst alot quieter now no more problems sucked in cops hahahahahahahaha

sean

hahah love this mentality...

more like YOU got sucked in, having to pay for 2 exhaust systems to get it right. *shakes head*

With that in mind... words of wisdom from a certain BKS

Research first

Congrats on the new exhaust mate B)

Evo

[RoM2nV]

drove it enthusiastically in the wet, if you catch my 'drift'...

[outback]

went bush

[sikwitit]

redone my exhorst alot quieter now no more problems sucked in cops hahahahahahahaha

sean

hahah love this mentality...

more like YOU got sucked in, having to pay for 2 exhaust systems to get it right. *shakes head*

they only replaced the muffler not the whole system

sean

[Andrew357]

tried to install a UR Strut Brace for my car.

Doesn't quite fit <_< . Going to have a chat to Luis tomorrow...!

[DJKOR]

tried to install a UR Strut Brace for my car.

Doesn't quite fit <_< . Going to have a chat to Luis tomorrow...!

The ones for the Gen 6 Camry/Aurion were a little like that at first. The guys that noticed it the most were the Gen 6 owners in the States on Toyota Nation. They used a rubber mallet to solve the problem. Yours looks a little more off than most of the usual cases. Let us know what Luis suggests.

You know, if you can't come up with some solution, you could try lifting the front of the car so the two front wheels are off the ground. That may help give that little more clearance you'd be surprised.

[Andrew357]

tried to install a UR Strut Brace for my car.

Doesn't quite fit <_< . Going to have a chat to Luis tomorrow...!

The ones for the Gen 6 Camry/Aurion were a little like that at first. The guys that noticed it the most were the Gen 6 owners in the States on Toyota Nation. They used a rubber mallet to solve the problem. Yours looks a little more off than most of the usual cases. Let us know what Luis suggests.

You know, if you can't come up with some solution, you could try lifting the front of the car so the two front wheels are off the ground. That may help give that little more clearance you'd be surprised.

That's what I'll probably do. I wasn't too keen on forcing the bar down in case setting up the brace under pressure was a bad idea.

I'll probably replace my front struts, get a 20mm Rear Sway, replace my worn Rear Control Arm bushes + get those poly steering bushes from Supatouring and take it somewhere to get it setup all in 1 hit.

[Andrew357]

Sucessfully installed the Strut Brace.

Had to undo all of the upper strut bolts and jacked up the car so I could push down the tire to get the bolt to drop so the brace could be installed.

[Guest]

f*ck yeah, wideband got here today :D

[outback]

made a friend :D

[httttt]

As an experiment, changed my grill mesh from black to silver(ish). Don't mind it...

I like it Michael, but I personally think it will look better if it wasnt shiny (still silver, but not shiny).