Jump to content


Recommended Posts

Posted

IMO, it would look better in black, to break up the colour, it would just look better from an aesthetic point of view, otherwise I think it'd be too much white, but good luck with which ever you decide, I'm sure it'll look great B)

well speaking of having it all black....

post-13790-0-54839300-1297958096_thumb.j

again not too sure if i like it...

Grille looks great Davo,i'm still not sold on the eyelids either...still got my set sitting in the spare room collecting dust :unsure:


Posted

IMO, it would look better in black, to break up the colour, it would just look better from an aesthetic point of view, otherwise I think it'd be too much white, but good luck with which ever you decide, I'm sure it'll look great B)

well speaking of having it all black....

post-13790-0-54839300-1297958096_thumb.j

again not too sure if i like it...

Grille looks great Davo,i'm still not sold on the eyelids either...still got my set sitting in the spare room collecting dust :unsure:

Give them to me. I'll dust them off for you :P

Posted

Pulled the driveshafts out, now everything but the mounts is disconnected, engine an transmission ready to come out.

Posted

It looks good Davo, I'd have to see it in white as well to decide what I reckon looks better, but the black does definitely work


Posted

:D Brought some more beige interior parts for the wagon, going to be a mission swapping the lower half of the dashboard :g:

Posted

Replaced near side passenger window on Thursday, stripping the paint on the replacement seca bumper today, cutting out existing grills tomorrow, sanding and painting bumper bar and main grill tomorrow, and doing a bit of custom meshing and badging on the grills Monday :)

Posted

Fitted coilovers today: Welcome to scrub central :(

Will be getting guards rolled monday hopefully

Posted

Fitted coilovers today: Welcome to scrub central :(

Will be getting guards rolled monday hopefully

Play with your setup before rolling the guards...sorry mate i forgot,what size rims & tyres are you using?

Posted

Fitted coilovers today: Welcome to scrub central :(

Will be getting guards rolled monday hopefully

Play with your setup before rolling the guards...sorry mate i forgot,what size rims & tyres are you using?

Hey mate

Im running 245 35 19, i adjusted the stiffness and it is better but at times their is guards touching.

Im still happy

Posted

Looked at how dirty it was after work, cant even wash it because i ran out of washing liquid. Cant buy anymore this weekend because im working all weekend. Not going to a serve serve washing place, because it doesnt clean the car good enough. I also have no polish. Angry.

Posted

Fitted coilovers today: Welcome to scrub central :(

Will be getting guards rolled monday hopefully

Play with your setup before rolling the guards...sorry mate i forgot,what size rims & tyres are you using?

Hey mate

Im running 245 35 19, i adjusted the stiffness and it is better but at times their is guards touching.

Im still happy

ok...so your running the same as me and a few others,i've found 610mm is about as low as you can go with NO SCRUBBING at all,any lower and she scrubs,i think Davo's running 605mm and having some minor issues at that height,but in saying this mine is an ATX,but i don't think that matters in this case.

anyway good luck with getting it sorted mate,and also don't panic it took me about 4 height adjustments to get the right setup,trust me it's there without rolling the guards.

Cheers

Lee

Posted

Discovered a scratch that extends across my drivers and passengers doors :angry: Thankfully its light and will come out, going to get Panels and Performance here to do a cut for me I think as there are a few I haven't been able to get out.. If its not too expensive I'll get it done this week and then polish and wax on Saturday!

Posted

Washed, wiped down with isopropyl, applied auto glym super resin polish, and topped with extra gloss protection. All nice and glossy :)

Also booked her in for her next big mod :) :)

Posted

sorry its not about my car but I took the new fj cruiser for a drive today... I want one :)

Posted

went out to super cheap auto and bought the fella meguiar's ultimate wash and wax, even left it in the car so he could cuddle up with it all night. :lol:

Posted

FINALLY washed my car. Hasn't been washed since the Kiama cruise nearly a month ago.

Posted

Gave her a good clean for tomorrow's VIC meet. Will give her a wax after work :D

Posted

Gave Aurora the full exterior work over - glass polish, blackening trims etc Now she looks shiny as again :D All ready for our meet tomorrow :yahoo:

Also de-badged the rear and put in new SMD LED bulbs for my licence plate lights, will update my ride thread tonight :D

Posted

took front left wheel off as it was making a squeek during deceleration. Found a very small rock stuck within there... hopefully that's the culprit!

Posted

installed 6000K HIDs...they flicker a little which i hope gets fixed with a relay..and one seems brighter <_< but still it feels so luxurious driving at night!

img_4032copyrlnm.jpg

img_4031copykbiw.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership