Jump to content

Andrew's Supercharged 2003 Camry V6 with bacon + egg, no sauce.


Andrew357

Recommended Posts

This is my 2002 Camry Sportivo V6 (MCV36R). Given to me by my brother unmodded besides the roof/bike racks, sunroof and the reverse sensors. I got my first mod late March 2009/Early April 2009 which was the headers and catback. Have had a few mods since then, with plenty more round the corner.

ENGINE & EXHAUST

TRD 1mz-fe Supercharger @ 4psi

TRD 1mz-fe boost controller

CES Equal length, mandrel bent extractors, mild steel, painted

CES 2¼ Catback + Lukey Ultra Flow muffler

CES Cold Air Induction w/K&N Pod Filter

Denso IK22 spark plugs

Purolator PureONE oil filter

Mobil1 5-50w oil

Removed intake resonator

TRD High pressure (1.3) radiator cap

TRD Oil Cap

DRIVELINE, SUSPENSION & HANDLING

Whiteline 20mm, blade adjustable rear sway bar + Superpro Poly bushes

Custom made, 3 part steel strut brace. Black brackets and stainless round bar.

UltraRacing 2-point rear lower bars

Koni Adjustable shocks (Koni Sport) + Bilstein strut housing (front and rear)

KINGS Superlow springs

TWM Performance short shifter + TWM base bushes

SuperPro lower steering rack bushes

SuperPro lower control arm, double offset bushes

SuperPro engine steady bushes

SuperPro trailing arm bushes

INTERIOR

Facelift Gen 5 Sportivo seats (front and rear)

Facelift Gen 5 Sportivo door cards

'Desert Eagle' 600g weighted knob

Carbon fibre + leather steering wheel

Tinted windows

Sportivo Accessories 'Sports' pedals

Genuine Camry floor mats

Stebel TM80 Magnum horn

EXTERIOR

Full Sportivo Accessories bodykit

Sportivo Accessories sports grille

Sportivo Accessories high-rise rear spoiler

Moonroof

3m-carbon vinyl wrapped roof

Reverse parking sensors

Phillips Extreme power bulbs low beam

Personalised registration plates

De-badged

Tinted tailights

WHEELS/TYRES & BRAKES

Enkei Imola 18x8 wheels

Dunlop Sport Maxx RT 235/40/18R tyres

TRD Aurion twin piston brake calipers

RDA Gold slotted and dimpled rotors, 325*32mm

TRD Aurion rear brake caliper (up to a 40mm piston)

RDA Slotted rotor, 310*18mm (now a vented rotor)

TRD pads (front)

QFM HPX pads (rear)

Penrite 525 brake fluid

ICE

Kenwood DNX5360 6.1" screen with Navigation

2x Response 2-Channel 150W RMS amplifiers

Polk Audio MM6501 6.5" Splits

Polk Audio MM691 6x9" coaxials

Custom subwoofer box (sealed), 4x12" Kenwood KFC-W1012 drivers wired in Series Parallel @ 4ohm

Rockford Fosgate Prime R500-1 amplifier

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

6.jpg

newbay.jpg

dyno1.jpg

http://www.youtube.com/watch?v=c8j1tsa0tck'>http://www.youtube.com/watch?v=c8j1tsa0tck

post-14703-1248771455_thumb.jpg

post-14703-1248771474_thumb.jpg

post-14703-1248771480_thumb.jpg

post-14703-1265202136_thumb.jpg

post-14703-1265202160_thumb.jpg

post-14703-1265202180_thumb.jpg

post-14703-1265202397_thumb.jpg

post-14703-1265457470_thumb.jpg

Edited by Andrew357
  • Like 2
Link to comment
Share on other sites


Whats so humble about it? lower it a bit and it'll look hotter than it does now B)

Nice one and i love the badge on the skirt..Top job

and V6 manual...coooooooooool

Link to comment
Share on other sites

thanks for the comments (probably wouldn't lower it though)!

I'd probably upgrade the headunit soon + possibly add a TRD supercharger to it later on. Paint detailing/possible repaint isn't out of the question either.

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...
thanks for the comments (probably wouldn't lower it though)!

I'd probably upgrade the headunit soon + possibly add a TRD supercharger to it later on. Paint detailing/possible repaint isn't out of the question either.

Bah, eat my own bloody words.

Getting King Lows installed this Friday.

Will post back with pictures + my thoughts on handling.

  • Like 1
Link to comment
Share on other sites

thanks for the comments (probably wouldn't lower it though)!

I'd probably upgrade the headunit soon + possibly add a TRD supercharger to it later on. Paint detailing/possible repaint isn't out of the question either.

Bah, eat my own bloody words.

Getting King Lows installed this Friday.

Will post back with pictures + my thoughts on handling.

Hahah that didn't take long!!! Welcome to the Manual Sportivo club heheheh With the V6 too that thing would fly! Keep those snaps coming :D

Link to comment
Share on other sites

thanks for the comments guys.

Just got back from a meeting tonight. Quite enjoyable so you will probably see my face around more often.

1 more sleep and she's lowered! :D

  • Like 1
Link to comment
Share on other sites

Boing Boing! New springs!

post-14703-1250835927_thumb.jpg

post-14703-1250835937_thumb.jpg

Have witnessed a slight decrease in ride quality, but I am enjoying the stiffness.

Rear sway + TRD strut brace next.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Installed a Ultra Racing Strut Brace today.

Had to remove the upper strut nuts on the left Strut to allow the strut to drop when I jacked the car, in order for the brace to fit.

post-14703-1253596595_thumb.jpg

post-14703-1253596604_thumb.jpg

  • Like 1
Link to comment
Share on other sites

make much difference over the standard brace? im thinking there may not be that great a difference

Took her out for a spin tonight and I can notice a difference. Whether it's a placebo effect or not is a different story.

The front feels tighter but I can definitely feel the body roll in the rear now.

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Heya Andrew!

Nice ride there dude!

Just wondering on your thoughts on your full exhaust system that you have done.....

Was there a big difference? I did see that the curves on the dyno sheet looked pretty clean.

Is it worth forking out the money for it?

Cheers dude!!

Keep it up.

Go the 5 Speed V6!!! Although I wish it was a six speed and better ratios hehe

Link to comment
Share on other sites

Heya Andrew!

Nice ride there dude!

Just wondering on your thoughts on your full exhaust system that you have done.....

Was there a big difference? I did see that the curves on the dyno sheet looked pretty clean.

Is it worth forking out the money for it?

Cheers dude!!

Keep it up.

Go the 5 Speed V6!!! Although I wish it was a six speed and better ratios hehe

Was very happy with spending the money for the full exhaust system.

I gained alot of power in the lower end of the spectrum which is useful, especially from a standing start. It's hard to say how much I gained from it, simply because I haven't really pushed it in the higher gears. However, dropping it into 3 @ 100kph, theres' still alot of pull which makes overtaking alot easier to do as well.

from ~60 - ~100kph in 2nd gear, the engine + exhaust sings a really nice tune and you can really feel the pull.

In addition to the power gain, I gained fuel efficiency as well. I was getting around 14-15L/100 prior to the install, and since I've got the work done, my average has been 12.71L/100 over ~8200km.

Well worth it, but expect to pay a penny or two!

  • Like 1
Link to comment
Share on other sites

Sounds awesome dude!

Yeah I figured I need a little more on the lower to mid end especially for start offs with our heavy cars.

I mean, if you do experience a significant difference (for the better), it definately wouldn't be a waste of money.

It's gonna take me a while to be able to get all these things now since I'm need to keep money for other things lol

But thanks for the experience-sharing

Oh and keep up the good work! hehe

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 16

      FUEL WARNING MESSAGE

    2. 1

      2002 Hilux Engine Replacement

    3. 0

      Transmission clunk

    4. 16

      FUEL WARNING MESSAGE

    5. 0

      Yaris Cross roof rack

    6. 0

      Hello Toyota Club AU

    7. 16

      FUEL WARNING MESSAGE

    8. 0

      How hard is to to fit an clinometer?

    9. 0

      Hilux 2.7 1998 has knock in motor

    10. 7

      2017 Kluger AWD. Noise in Cabin - Bearing/Diff. Not Sure.

×
×
  • Create New...

Forums


News


Membership